Safety A Small Investment For A Rich Future 

Fike Rupture Disc (Pressure Relief)

HomeFike Rupture Disc (Pressure Relief)

Learn more on our Products

Download Brochure

Rupture Disc a Pressure relief solution

Rupture disc is designed to provide a leak tight seal within a pipe or vessel until the internal pressure rises to a predetermined level. At that point, the disc bursts preventing damage to the equipment from overpressure.

Fike Rupture Disc (Pressure Relief)
Fike Rupture Disc (Pressure Relief)

Rupture disc is designed to provide a leak tight seal within a pipe or vessel until the internal pressure rises to a predetermined level. At that point, the disc bursts preventing damage to the equipment from overpressure.

ASME Section VIII, Division 1, Application Requirements

The ASME Code defines certain sizing and pressure rating criteria for various applications of rupture discs. In the case of primary relief or sole relieving device (shown in fig. 1), it must be sized to prevent the pressure in the vessel from rising more than 10% or 3 psi, whichever is greater, above the maximum allowable working pressure (MAWP) of the vessel. In addition, the rupture disc marked burst pressure shall not exceed the MAWP.

Fike Rupture Disc (Pressure Relief)
Fike Rupture Disc (Pressure Relief)

The ASME Code allows rupture disc devices to be used in multiple as a secondary device to other rupture disc devices or pressure relief valves (shown in fig. 2). In this case, the secondary device is sized to prevent the pressure in the vessel from rising more than 16% or 4 psi, whichever is greater, above the MAWP. The burst pressure of the secondary device may be marked at a pressure not exceeding 105% of the MAWP.

Fike’s G2 Technology

G2 is a patented, state-of-the-art technology used to manufacture rupture discs without hard-score tooling, producing no stress zones that can fatigue and offering premium performance. The result is a low pressure rupture disc solution featuring tight burst tolerances and extremely high operating ratios. In addition, the advanced automation significantly increases consistency and provides for fast, economical delivery time.

Fike’s premier discs, the Axius®, Axius® SCand ATLAS are products of G2 Technology

Fike Rupture Disc (Pressure Relief)

Figure: Fike Axius Rupture Disc equipped with G2 Technology

G2 Technology Rupture Discs surpass other low pressure rupture discs in every performance category.

Features:-

  • Tightest Tolerances
  • Highest Operating Ratio
  • Superior Cycling Ability
  • Smoothest Process Surfaces
  • Operates in Gas and Liquid Applications
  • ASME/CE Certified
Fike Rupture Disc (Pressure Relief)


Figure: Patented G2 Technology featuring pre-bulged methods and milled or laser ablated opening features.

For More Info: Read Here

FIKE PRODUCTS

FIKE RUPTURE DISC

FIKE EXPLOSION PROTECTION SYSTEM

FIKE DUST TEST SERVICES

Fike Rupture Disc (Pressure Relief)

Learn more on our Products

Download Brochure

Gati Petrochem E&A Sdn Bhd

Gati Petrochem E&A Sdn Bhd is a private limited company incorporated in 2007 focusing on Sales & After Sales services as well as giving total support and solutions to various general industries.

Gati Engineering Sdn Bhd

Our main focus is to provide maintenance and commissioning with a view to give maximum satisfaction to customers, sales, and after sales services.

Copyright © Gati Petrochem E & A Sdn Bhd. 2020
×

Welcome to Gati

Chat with our representative on WhatsApp for further enquiries

× Whatsapp Us For More Info